Technical Specifications

The CloudConnect is a compact, battery-powered leak detection device designed for use with the Andel Cloud platform. It connects via Wi-Fi and is configured using Bluetooth and the mobile app.

This page outlines the technical and environmental specifications for the CloudConnect device.

Physical Specifications

Parameter	Specification
Dimensions	80 mm × 80 mm × 30 mm
Weight	Approx. 100 g (with batteries)
Enclosure Type	SLS Printed Nylon 12
Mounting	Freestanding
Ingress Rating	IP40 (indoor use only)

Power

Parameter	Specification
Power Source	3 × AAA batteries (alkaline or NiMH rechargeable)
Battery Life	12–18 months (typical use, good signal strength)
Power Indicator	Status LED + portal/app battery level
Charging Support	Not applicable (replace batteries)

Connectivity

Feature	Specification
Wi-Fi	Wi-Fi 4, 2.4 GHz, WPA2
Bluetooth	Bluetooth Low Energy (BLE) for setup
OTA Support	Firmware updates via Andel Cloud
Local Communications	ESP-NOW for peer-to-peer triggering (used in alarm groups)

Wi-Fi signal strength and battery performance may be affected by enclosure placement and building materials.

Sensors and Interfaces

Feature	Specification
Internal Probes	Gold-plated leak detection contacts
External Inputs	Terminal block for one additional sensor
Supported Add-Ons	- Andel Flexi-Pad® flat sensor - Point Sensor (normally closed)
Outputs	None (input-only device)

External sensor inputs are optional. If not connected, the device uses its built-in probes.

Environmental Limits

Parameter	Specification
Operating Temp	0°C to 40°C
Operating Humidity	0% to 85% RH (non-condensing)
Storage Temp	–10°C to 50°C

Not suitable for submersion in water, condensation, or outdoor environments.