Safety Information
The FlowStop 2 is a device for monitoring water flow and isolating the water supply in potential leak conditions. It is intended for use in domestic and light commercial situations and cannot be used outside of its operating parameters. Both the control unit and valve unit are for indoor use only.
Inappropriate or incorrect use of this product could prevent it from operating and could create hazardous conditions, such as water leaks or restriction of water supply, and could void the warranty.
Danger
This device is mains powered - always follow safe isolation procedures to disconnect the device from mains power before any work.
Authorised Installers
Installation of this device should only be carried out by trained installation personnel.
Appropriate personal protective equipment should be worn at all times when working on or with the device.
General Safety Guidelines
- Read any instructions carefully before starting any work on the unit.
- Take note of any warnings or hazards identified in this manual. Failure to follow instructions may result in personal injury or property damage.
- Ensure local regulations regarding electrical and plumbing work are followed.
- Inspect all plumbing connections for leaks after installation and periodically.
- Ensure that the environmental and installation conditions will not exceed any limits set out in the technical specifications page.
- Do not remove any warning or regulatory stickers attached to the product.
- Do not attempt to repair any components; always contact a qualified technician for support.